Stamp Module Specification
Dimension: 63 x 52 mm
CPU: 400 MHz Samsung S3C2440A ARM920T (Max freq. 533 MHz)
RAM: 64 MB SDRAM, 32 bit 100 MHz Bus
Flash: 256MB NAND Flash and 2 MB NOR Flash with BIOS
LCD Interface (For VGA support, find our module products)
STN Displays:
4 bit dual scan, 4 bit single scan or 8 bit single scan display type
monochrome, 4 gray levels, 16 gray levels, 256 colors or 4096 colors
Max: 1024x768, 4096 colors
TFT Displays:
1, 2, 4 or 8 bpp palletized color displays
16 or 24 bpp non-palletized true-color displays
Max: 1024x768, 64k colors
Touch Panel: 4 wire resistive
User Outputs: 4x LEDs
Expansion headers (2.0mm)
Debug: 10 pin JTAG (2.0mm)
OS Support
Android
Linux 2.6
Windows CE 5.0. Boot up very fast in 5 seconds. Support your own logo pitcture.
Windows CE 6.0 R3 commercial, +299USD.
Mother board specification
Dimension: 180 x 130 mm
EEPROM: 1024 Byte 24C08 (I2C)
Ext. Memory: SD-Card socket
Serial Ports: 3x DB9 connector (RS232)
USB: 4x USB-A Host, 1x USB-B Device
Audio Output: 3.5 mm stereo jack
Audio Input: 3.5mm jack (mono)
Ethernet: RJ-45 10/100M (DM9000)
RTC: Real Time Clock with battery
Beeper: PWM buzzer
Camera: 20 pin Camera interface
LCD: Connector for 3,5" and 7" FriendlyARM Displays
Touch Panel: 4 pin
SD card max to 32GB
User Inputs: 6x push buttons and 1x A/D pot
Expansion headers (2.0mm)
Power: 5V with switch and LED
Price
S3C2440SBC, 49USD.
S3C2440SBC+mother board, 129USD.
S3C2440SBC+mother board+3.5" touch LCD, 149USD.
S3C2440SBC+mother board+7" touch LCD, 199USD.
Package
1. S3C2440SBC
2. mother board and TouchScreen LCD at your option
3. 1 Serial cable
4. 1 Net cable
5. 1 USB cable
6. 5V Power Adapter
7. 1 JTAG board(for H-JTAG)
8. User Manual, Schematics, Demo code, Source code & Data Sheets
For VGA output support, find in our module products.
You might have interest to know what products this board makes, some samples here:
http://www.quickembed.com/en/S3C2440.htm
build a GPS system:
http://www.quickembed.com/en/gps.htm
The advantage of SBC is that when you define a new product, you have only small change on baseboard/motherboard, no change on SBC/daughter board, it saves great effort, and save much expense as the SBC is big lots produced while baseboard can be produced in small lots, also this helps improving the quality of your products.
